--- title: "Configure RADIUS authentication" slug: "configure-radius-authentication-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:11Z published: 2026-11-19T12:31:11Z canonical: "docs.trellix.com/configure-radius-authentication-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure RADIUS authentication The RADIUS server is enabled from the Manager for Sensor CLI login authentication. The Manager does not support TACACS+ and RADIUS authentication at the same time for an admin domain/device. Enabling both the authentication systems might result in conflict, and hence both might not function efficiently. A pop-up message is displayed whenever either one of the authentication system is already enabled. 1. Navigate to **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **RADIUS**. 2. Select **Enable RADIUS CLI Authentication?**. > [!NOTE] > Note > > RADIUS authentication is disabled by default. 3. Enter the details for the following fields: | Option | Definition | | --- | --- | | **Primary RADIUS Server** | | | **Server IP Address** | IPv4 address of the primary RADIUS server. | | **Shared Secret** | Password that is required on both the Sensor CLI and the RADIUS server. The **Shared Secret** is same as entered in the RADIUS server during configuration. > [!NOTE] > Note > > The shared secret should not contain any blank spaces. | | **Authentication Port (UDP)** | Port through which the primary RADIUS server communicates. | | **Connection Timeout** | Time after which the session logs out automatically. You can configure the time anywhere between 2 seconds to 20 seconds. | | **Enable Accounting?** | When enabled, the primary RADIUS server keeps account of the records like the current session duration and information about current data usage. This option is disabled by default. | | **Accounting Port (UDP)** | Port through which the primary RADIUS server communicates to keep account. | | **Secondary RADIUS Server (optional)** | | | **Server IP Address** | IPv4 address of the secondary/backup RADIUS server. | | **Shared Secret** | Password that is required on both the Sensor CLI and the RADIUS server. The **Shared Secret** is same as entered in the RADIUS server during configuration. | | **Authentication Port (UDP)** | Port through which the secondary RADIUS server communicates. | | **Connection Timeout** | Time after which the session logs out automatically. You can configure the time anywhere between 2 seconds to 20 seconds. | | **Enable Accounting?** | When enabled, the secondary RADIUS server keeps account of the records like the current session duration and information about current data usage. This option is disabled by default. | | **Accounting Port (UDP)** | Port through which the secondary RADIUS server communicates to keep account. | 4. Click **Save** to save the settings. > [!NOTE] > Note > > In case of child domains, you can inherit the same settings using the **Inherit Settings?** option for RADIUS authentication.