--- title: "Configure Sensor Monitoring Ports" slug: "configure-sensor-monitoring-ports-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/configure-sensor-monitoring-ports-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Sensor Monitoring Ports **Prerequisites:** - The Sensor must be set up with trust established with a Manager server. - The Sensor has a free port pair which can be deployed in in-line Active fail-open mode. - It is assumed that you have inserted the necessary transceiver modules into the Sensor if you have completed cabling the Sensor and the Fail-Open module. When you set up a Sensor for the first time, its ports are disabled by default. The Sensor ports must be manually configured for in-line fail-open operation. **Steps:** 1. In the Manager, go to **Devices** → **** → **Devices** → **** → **Setup** → **Physical Ports**. 2. Double-click on one of the configurable ports, say **G2/1**. A configuration panel appears on the right side of the window. 3. Click the **State** drop-down and select **Enabled**. You are asked whether you want to proceed since this configuration will also impact port **G2/2**. 4. Click **Yes** to proceed. This enables port G2/1-G2/2. 5. Click the **Mode** drop-down and select **In-line Fail-Open – Active**. 6. Click the **Placement** drop-down and select **Inside Network** or **Outside Network**, depending on how you want to configure your ports. Trellix recommends choosing **Gx/1** as the **Inside Network** and **Gx/2** as the **Outside Network**. ![GUID-141D09A5-8CA6-40AE-B21D-9CD2FB2B20A3-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1dcc7a74-e66a-325c-481a-6436a687e10f.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A15%3A38Z&se=2026-11-20T21%3A15%3A38Z&sr=c&sp=r&sig=MIYwO4D2gIMNCrDSR6RMpe7C1TA3DD2pUnW0NluqYzU%3D) 7. Click **Save**. **Result:** The Sensor and Fail-Open modules are set up. When traffic passes through the ports, you will notice the port link status changes to **Up** and turns green.