--- title: "Configure Sensor Monitoring Ports" slug: "configure-sensor-monitoring-ports-2" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/configure-sensor-monitoring-ports-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Sensor Monitoring Ports **Prerequisites:** - The Sensor must be set up and have a trust established with a Manager server. - The Sensor has a free port pair which can be deployed in Inline Active Fail-Open mode. - It is assumed that you have inserted the necessary transceiver modules into the Sensor if you have completed cabling the Sensor and Fail-Open module. When you set up a Sensor for the first time, its ports are disabled by default. The Sensor ports must be manually configured for Inline Fail-Open operation. **Steps:** 1. In the Manager, go to **Devices** → **** → **Devices** → **** → **Setup** → **Physical Ports**. 2. Double-click on one of the configurable ports, say **G2/1**. A configuration panel appears on the right side of the window. 3. Under **State**, select **Enabled** from the drop-down list. You are asked whether you want to proceed since this configuration also impacts port **G2/2**. 4. Select **Yes** to continue. This enables port G2/1-G2/2. 5. Under **Mode**, select **In-line Fail-Open – Active** from the drop-down list. 6. Under **Placement**, select **Inside Network** or **Outside Network** from the drop-down list, depending on how you want to configure your ports. Trellix recommends choosing **Gx/1** as **Inside Network** and **Gx/2** as **Outside Network**. ![GUID-EFEB2BFD-DD8C-4785-BD94-CCE645B3D5F6-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f0e8a0d-e215-874c-eefc-87bfcab41561(1).png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A07%3A48Z&se=2026-11-20T21%3A07%3A48Z&sr=c&sp=r&sig=Uu6pknh3%2B5roO4p8%2F4U5alAMTPeaJq5HvzuwXS0Y86Y%3D) 7. Click **Save**. **Result:** The Sensor and Fail-Open module are set up. When traffic passes through the ports, the port link status changes to **Up** and turns green.