--- title: "Configure Simulated Blocking at the interface level" slug: "configure-simulated-blocking-at-the-interface-level-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/configure-simulated-blocking-at-the-interface-level-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Simulated Blocking at the interface level You can configure Simulated Blocking at the interface level. 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **Simulated Blocking**. By default, **Simulated Blocking** is disabled for the entire device. **Simulated Blocking dialog**![Simulated Blocking dialog](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ff611f56-88ec-22f2-911b-6ec4a0157f3d(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A39Z&se=2026-11-20T13%3A00%3A39Z&sr=c&sp=r&sig=73LA5CDZ8GF6GLbgDULDSHypcfcrRA5xVx%2F7JaEjoxo%3D) 6. Select **Simulated Blocking** for inbound/outbound traffic. > [!NOTE] > Note > > Simulated Blocking is not supported separately for the traffic directions. If one is configured (enabled/disabled), the other is also configured similarly. 7. From the **State** drop-down list, make a selection. - To enable Simulated Blocking device wide, select **Simulation enabled for the entire device**. - To disable Simulated Blocking device wide, select **Simulation disabled for the entire device**. - To control Simulated Blocking per VIDS, select **Enable simulation per interface**. 8. Click **Save**. The device level settings override the interface level settings, that is, you cannot configure Simulated Blocking at the interface level if it is configured at the device level.