--- title: "Configure Simulated Blocking at the interface level" slug: "configure-simulated-blocking-at-the-interface-level" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:47Z published: 2026-10-05T15:39:47Z canonical: "docs.trellix.com/configure-simulated-blocking-at-the-interface-level" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Simulated Blocking at the interface level You can configure Simulated Blocking at the interface level. ## Task 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **Simulated Blocking**. By default, **Simulated Blocking** is disabled for the entire device. Simulated Blocking dialog ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-0FF996F3-16F2-48D8-8CFB-287247C2D9BC-low.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A25Z&se=2026-11-20T11%3A34%3A25Z&sr=c&sp=r&sig=sQh8PDcKOnk6S2bYAW%2Bb24Z31VE3k5Vtqfcr0BYNjsI%3D) 6. Select **Simulated Blocking** for inbound/outbound traffic. > [!NOTE] > Note > > Simulated Blocking is not supported separately for the traffic directions. If one is configured (enabled/disabled), the other is also configured similarly. 7. From the **State** drop-down list, make a selection. - To enable Simulated Blocking device wide, select **Simulation enabled for the entire device**. - To disable Simulated Blocking device wide, select **Simulation disabled for the entire device**. - To control Simulated Blocking per VIDS, select **Enable simulation per interface**. 8. Click **Save**. The device level settings override the interface level settings, that is, you cannot configure Simulated Blocking at the interface level if it is configured at the device level.