--- title: "Configure stateless access rules" slug: "configure-stateless-access-rules-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:20Z published: 2026-11-19T12:30:20Z canonical: "docs.trellix.com/configure-stateless-access-rules-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure stateless access rules **Prerequisites:** - You have created an advanced or classic Firewall policy to which you want to add stateless access rules. - You have created the rule objects, especially the service or service group rule objects, required to create your stateless access rules. Create stateless access rules to allow or block certain traffic without deeper inspection. 1. Select **Intrusion Prevention** → **Policy Types** → **Firewall**. 2. Double-click the Firewall policy in which you want to add the stateless rules. 3. In the **Firewall** window, click **Access Rules**. 4. Select the top-most rule and click ![GUID-002605CA-A671-41C2-AC91-CCE74A6CB27E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d3045ce-12f2-7972-e28b-71bc39197745(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A15Z&se=2026-11-20T11%3A16%3A15Z&sr=c&sp=r&sig=myTUOaCKui9o33X5wStX95YSQ1Yu3sr8Fs1vPMpmqXk%3D). > [!NOTE] > Note > > It is recommended to have the stateless rules above any of the other rules. 5. Optionally, double-click the **Description** field to describe the rule. 6. Select the appropriate values for **Source Address, Source User, Destination Address, Effective Time,** and **Direction.** 7. For **Application**, select the required Service and Service Group rule objects. 8. In the **Response** column, select **Stateless Drop** or **Stateless Ignore**. 9. Click **Save**. 10. Update the Sensor configuration for the rule to be enforced. You cannot log the packets that matched a stateless access rule. However, you can view the number of packets dropped by using the `show inlinepktdropstats <monitoring port>` command on the Sensor CLI. You cannot view the number of packets that were ignored according to stateless access rules. **Count of packets dropped according to stateless access rules**![Count of packets dropped according to stateless access rules](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a5d539a3-1a9e-9c6f-9b91-6c829f08a344(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A15Z&se=2026-11-20T11%3A16%3A15Z&sr=c&sp=r&sig=myTUOaCKui9o33X5wStX95YSQ1Yu3sr8Fs1vPMpmqXk%3D)