--- title: "Configure Syslog Forwarder" slug: "configure-syslog-forwarder" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:26:14Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/configure-syslog-forwarder" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Syslog Forwarder The **User Activity** option enables the forwarding of Trellix IPS audit information to a syslog server. Syslog forwarding enables you to view the forwarded audit information via a third-party syslog application. For syslog forwarding, the root domain and parent domains have the option to include audit information from all corresponding child domains. To enable syslog forwarding for audit notification, do the following: ## Task 1. Select **Manager** → **** → **Setup** → **Notification** → **User Activity** → **Syslog**. The **Syslog** page is displayed. 2. Fill in the following fields: | Field | Description | | --- | --- | | **Enable Syslog Notification** | **Yes** is enabled; **No** is disabled | | **Admin Domain** | - **Current**— Send notifications for audit information in the current domain. Always enabled for current domain. - **Children**— Include audit information for all child domains of the current domain. | | **Server Name or IP Address** | Type either the **Host IP Address** or **Server Name** of the syslog server where audit information will be sent. For **Host IP address**, you can enter either IPv4 or IPv6 address. > [!NOTE] > Note > > The length of server name has been increased to support up to 255 characters from 40 characters. | | **Protocol** | Select *TCP* or *UDP* from the drop-down list. > [!NOTE] > Note > > If you select the TCP protocol, you will have to provide a certificate when you select the **Use SSL** checkbox. | | **Port** | Port on the target server which is authorized to receive syslog messages. The standard port for syslog, 514, is pre-filled in the field. | | **Facilities** | Standard syslog prioritization value. The choices are as follows: - **Security/authorization (code 4)** - **Security/authorization (code 10)** - **Log audit (note 1)** - **Log alert (note 1)** - **Clock daemon (note 2)** - **Local user 0 (local0)** - **Local user 1 (local1)** - **Local user 2 (local2)** - **Local user 3 (local3)** - **Local user 4 (local4)** - **Local user 5 (local5)** - **Local user 6 (local6)** - **Local user 7 (local7)** | | **Result Mapping** | You can map each audit result (**Failed to**, **Successful to**, and **In Progress to**) to one of the standard syslog severities listed below (default result severities are noted in parentheses): - **Emergency**— System is unusable - **Alert**— Action must be taken immediately - **Critical**— (HIGH) Critical conditions - **Error**— Error conditions - **Warning**— (MEDIUM) Warning conditions - **Notice**— (LOW) Normal but significant condition - **Informational**— (INFORMATIONAL) Informational message - **Debug**— Debug-level messages | | **Forward Audit** | Select the severity of the audit that you want to be forwarded to the syslog server. The options are: - **Allow all Auditlogs** - **Failed only** - **Successful only** - **In Progress only** | | **Message Preference** | Select the preference of the message. The options are: - **System default**— This is available by default - **Customized**— This is available once the notification is enabled | 3. Click **Apply**.