Go to
, and then select the Integration Hub.In the Integration Hub, select Add New Integrations.
From the Available Integrations list, select Syslog Server Config.
The Syslog integration configuration page is displayed.
Configure the following fields -
Options
Description
Details
Integration Name
Set by default; not user-configurable.
Description
Set by default, not user-configurable.
Feature Settings
Logging Targets
Provide the IP address(es) of the target syslog server(s). Can be either IPv4 or IPv6:
IPv4 configuration format: IPv4 address:port
IPv6 configuration format: [IPv6 address]:port
Logging Export Protocol
Select either TCP or UDP from the drop-down
Logging Level
Set the logging level - Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug.
Alert Export
Select the Enable Alert Export check-box if you wish to enable export of alerts.
Enter IP address(es) of target server(s) for export in the IP address:port format.
Select TLS checkbox if you want to enable TLS encryption for syslog.
Note
Certificate needs to be uploaded to NDR Console before TLS encryption is enabled. See Configuring syslog server to enable TLS encryption for more information.
Notifications
Select Enable Log Shipping check-box to send logs to other security tools for monitoring.
Select Enable Audit Log Shipping to send audit logs to other security tools.
Select Save Changes to save the configuration.
Once saved, you are redirected to the Your Integrations page where the syslog server configuration is listed.
.png?sv=2026-02-06&spr=https&st=2026-11-19T11%3A20%3A14Z&se=2026-11-19T11%3A31%3A14Z&sr=c&sp=r&sig=ttlUEj8xePhJR5QybAl%2BLbjaMaLNp9fssslY44OxOrU%3D)
Note
You cannot add more than one syslog configuration from the Integration Hub.
Check the Syslog server data usage
From Your Integrations page, click on the Syslog Server Config.
The Integration Details page opens.
Check the Overview tab to see data usage by feature for the past 30 days and the Notification tab for check notification data usage for the past 30 days.
Note
You can also edit, disable, or delete the integration using the Integration Actions drop-down in the Integration Details page.
Edit the Syslog server integration
From Your Integrations page, locate the Syslog server config integration listing, click
and select Edit.Edit Integration page is displayed.
Make changes to the configuration as per your requirement and select Save Changes.
Disable the Syslog server integration
From Your Integrations page, locate the Syslog server config integration listing, click
and select Disable.A pop-up appears asking for confirmation. Select Yes to proceed.
Delete the Syslog server integration
From Your Integrations page, locate the Syslog server config integration listing, click
and select Delete.A pop-up appears asking for confirmation. Select Yes to proceed.