--- title: "Configure TACACS+ authentication" slug: "configure-tacacs-authentication-1" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:53Z published: 2026-10-05T15:39:53Z canonical: "docs.trellix.com/configure-tacacs-authentication-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure TACACS+ authentication The **TACACS+** action enables you to enable and disable TACACS+ authentication for the selected admin domain. The Manager does not support TACACS+ and RADIUS authentication at the same time for an admin domain/device. Enabling both the authentication systems may result in conflict, and hence both may not function efficiently. A pop-up message is displayed whenever either one of the authentication system is already enabled. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **TACACS+**. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A77EF1D8-428F-4EF2-810A-ECBDCC09A38F-low.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A04%3A50Z&se=2026-11-22T15%3A04%3A50Z&sr=c&sp=r&sig=LwTkjwapE1O9GCDU5EUN4rAqCZcSquGz7%2FCRp9Dsog8%3D) 2. Select **Yes** to enable TACACS+. 3. Enter the **TACACS+ Server IP Addresses**; you can enter up to four IP Addresses for the TACACS+ server. At least one IP address is required if you enable TACACS+. 4. To encrypt TACACS+ traffic select **Yes** to **Enable Encryption?**. If you select **Yes**, you need to enter an encryption key in the **Encryption Key** field. The maximum length of the key is 64 bytes. 5. To save the changes, click **Save**. > [!NOTE] > Note > > The **Inherit Settings** choice is available for the **Enable TACACS+** option from child admin domains.