--- title: "Configure TACACS+ authentication" slug: "configure-tacacs-authentication" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:35:02Z published: 2026-09-23T09:35:02Z canonical: "docs.trellix.com/configure-tacacs-authentication" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure TACACS+ authentication The TACACS+ action enables you to enable and disable TACACS+ authentication for the selected device. ## Task 1. Select **Devices** → **** → **Devices** → **** → **Setup** → **Remote Access** → **TACACS+**. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-4441F20A-1852-4DAF-A571-E031E40F9565-low.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A39%3A57Z&se=2026-11-20T08%3A39%3A57Z&sr=c&sp=r&sig=K9CgLfD8dC3m0r26hkAVFG4jc0o%2FNrFkezkTImumQtI%3D) 2. Select **Yes** to enable TACACS+. 3. Select **Inherit from Parent Domain** to use the TACACS+ settings in the parent domain. 4. Enter the **TACACS+ Server IP** Address in the IP Address fields; you can enter up to four IP Addresses for the TACACS+ server. At least one IP Address is required if you enable TACACS+. 5. Select **Yes** to **Enable Encryption**. When you enable encryption, you need to enter an encryption key in the **Enable Encryption** field. The maximum length of the key is 64 bytes. 6. Click **Save** to save the configuration.