Before you begin
- Make sure you have configured a Sensor SPAN port as VM-Aware interface and specified VMware as the Virtualization Management Server Type.
- You have the details such as the IP address, communication port number, logon credentials with administrator permissions for vCenter and vShield.
When the Sensor generates an alert, the Manager determines if the corresponding monitoring port is a VM-Aware interface. If yes, and if you had configured VMware as the virtualization management vendor, it contacts the vCenter Server to collect details such as the source and destination ESX servers. For this, you need to configure the vCenter IP address details and logon credentials in the Manager.
When you quarantine the source host from an alert in Attack Log, the Manager integrates with vShield to include the corresponding VM in the Trellix Quarantine Security Group. So the vShield App will block all traffic originating from this VM. For this, you need to configure the vShield IP address and logon details in the Manager.
Task
-
Go to
Devices → <Admin Domain Name> → Global → IPS Devices Settings → Virtualization Settings.
The Virtualization Settings page appears.
-
Enter the required information to configure the connection to vCenter in the
Virtualization Settings page.
Note
You can add multiple VMware configurations for the same VM-Aware interface. If you configure multiple vCenter and vShield for the same interface, the Manager determines the corresponding vCenter and vShield for an alert based on the VLAN in the attack traffic.
Option Definition vCenter IP Address IPv4 or IPv6 address of vCenter. vCenter Port Number Port number for communicating with the vCenter. It should be within the range of 65535. The default value is 443. vCenter Username Administrator user name to access the vCenter. vCenter Password Password for the vCenter. vCenter WebService Path The default path to the SDK on vCenter to which the Manager sends its requests is displayed. This field is not editable. - Click on the Test Connection button to check the connectivity.
-
To quarantine the virtual machine, select
Quarantine using vShield?.
Enter the required information in the following fields:
Option Definition vShield Manager IP Address IPv4 or IPv6 address of vShield Manager. vShield Port Number Port number for communicating with the vShield. It should be within the range of 65535. The default value is 443. vShield Username Administrator user name to access vShield. vShield Password Password for the vShield. vShield WebService Path The default path to the SDK on vShield to which the Manager sends its requests is displayed. Modify this path only if it is different in your setup. - Click on the Test Connection button to check the connectivity.
- Click Save to save the configuration in the Manager.