--- title: "Configure the Intelligent Sandbox Appliance network information" slug: "configure-the-intelligent-sandbox-appliance-network-information" updated: 2026-09-08T19:56:54Z published: 2026-09-08T19:56:54Z canonical: "docs.trellix.com/configure-the-intelligent-sandbox-appliance-network-information" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the Intelligent Sandbox Appliance network information Manage the Intelligent Sandbox Appliance from a remote computer or terminal server. 1. On the Intelligent Sandbox Appliance, connect a monitor to the VGA port. 2. Connect a keyboard to one of the USB ports. 3. To log on to the Intelligent Sandbox Appliance, use the following credentials. - **User name** — cliadmin - **Password** — atdadmin To access all the built-in command syntax instructions, enter **`help`** or **`?`**. For a list of all commands, enter **`list`**. 4. Open the command prompt and configure the Intelligent Sandbox Appliance. 1. Enter the Intelligent Sandbox Appliance name. For example, **`set appliance name matd_appliance_1`**. ### Tip **Best Practice:** Use an alphanumeric character string up to 25 characters. The string must begin with a letter and can include hyphens, underscores, and periods, but not spaces. 2. Enter the Intelligent Sandbox Appliance management port IP address and subnet mask. For example, **`set appliance ip 10.34.2.8 255.255.255.0`**. ### Note Do not assign this class C network IP address: **` 192.168.55.0/24`**. 3. Enter the default gateway IP address. For example, **`set appliance gateway 12.34.2.1`**. 4. Restart the Intelligent Sandbox Appliance. 5. Enter the management port speed and duplex settings using one of the following commands: - **`set mgmtport auto`** — Sets the management port in auto mode for speed and duplex. - **`set mgmtport speed (10|100) duplex (full|half)`** — Sets the speed to 10 or 100 Mbps at full or half duplex. 6. To change the Intelligent Sandbox Appliance password, enter **`passwd`**. Passwords are case sensitive, must not include spaces, and must contain the following: - Between 8 and 25 characters - At least one uppercase letter - At least one lowercase letter - At least one digit - At least one alphanumeric character or symbol ### Tip **Best Practice:** Enter a password with a combination of characters that is easy for you to remember, but difficult for someone else to guess. 7. Verify the configuration. - To view the configuration details, enter **`show`**. - To check the network connectivity, enter **`ping <IP address>`**. The success message **`host <ip address> is alive`** appears. If the host is not reachable, **`failed to talk to <ip address>`** appears. :