--- title: "Configure the Manager on MLOS" slug: "configure-the-manager-on-mlos-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/configure-the-manager-on-mlos-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the Manager on MLOS Login to the Manager/Central Manager virtual machine using a console client and configure the network settings as shown here. **Steps:** 1. Log in to the Manager shell using the following credentials: - Username: `admin` - Password: `MLOSnsmApp` > [!NOTE] > Note > > SSH connection to the Linux-based Manager Appliance is not supported by the Putty application. Trellix recommends you to use the Tera Term application for remotely accessing the Manager Appliance using SSH. > [!NOTE] > Note > > Trellix**strongly recommends** that you change the password immediately. The new password must be at least 8 characters in length and must contain a combination of numbers, characters, and special characters. For more information on password control, see the section *Configure password complexity settings* in the *Trellix Intrusion Prevention System Product Guide*. 2. To update network parameters, execute the `set network configuration` command to configure the Manager with an IPv4 address. Syntax: `set network configuration` > [!NOTE] > Note > > The `set network configuration` command overwrites the pre-existing network configuration in the Manager server. > [!NOTE] > Note > > IPv6 is supported only on the eth0 network interface from 11.1.7.84 onwards. For more information, see [set network ipv6](/network-and-platform/docs/set-network-ipv6). > [!NOTE] > Note > > You can terminate the network configuration by executing the `quit` command. On executing the `set network configuration` command, follow the steps below: 1. Select the type of NIC configuration: ``` Please select one of the below option: 1 -> Configure Single NIC 2 -> Configure Both the NIC's Input 1 or 2 based on you selection : ``` Type `1` to configure NIC 1 or NIC 2, or `2` to configure both NIC 1 and NIC 2. 2. Select the NIC to be configured with public IP address for management purpose: ``` Enter the NIC you want to configure with public network ip: 1 -> eth0 [NIC 1] 2 -> eth1 [NIC 2] Input 1 or 2 based on your selection : ``` Type `1` to select NIC 1 or `2` to select NIC 2 based on your network cable connection for public IP address. > [!WARNING] > Important > > The NIC 1 and NIC 2 ports are interchangeable: > > - When configuring a single NIC, you can assign the public IP address to NIC 1 or NIC 2. > - When configuring dual NIC, you can assign a public IP address to NIC 1 and a private IP address to NIC 2 or vice-versa. > [!NOTE] > Note > > The Manager Appliance can have only one public and one private IP address. 3. Enter the Manager Appliance network parameters as shown below: | Parameters | Description | | --- | --- | | `DOMAIN NAME` | Enter the domain name for the Manager server. | | `HOSTNAME` | Enter the hostname to be assigned to the Manager server. | | **`Configuring the eth"x" with public IP`** | | `IP ADDRESS` | Enter the public IP address to be assigned to the Manager server. | | `NETMASK` | Enter the subnet mask for the Manager server. | | `GATEWAY` | Enter the gateway address for the Manager server. | | `DNS1` | Enter the primary DNS server IP address. | | `Do you want to enter DNS2 <y/n>` | Type `y`, if you want to configure a secondary DNS server IP address, else type `n`. | | `DNS2` | (Optional) Enter the secondary DNS server IP address. | | **`Configuring the eth"y" with private IP`** (Applicable only when `2 -> Configure Both the NIC's` option is selected in step a). | | `IP ADDRESS` | Enter the private IP address to be assigned to the Manager server. | > [!NOTE] > Note > > The Manager server will reboot automatically after completing the network configuration. > [!NOTE] > Note > > Make a note of the MAC address displayed after successful execution of `set network configuration` command. You can now use the public IP address to access the UI from a remote location using a client machine and manage the Manager Appliance from a remote location using SSH . If required, unplug the monitor, keyboard, and mouse.