--- title: "Configure the monitoring ports to export L7 data" slug: "configure-the-monitoring-ports-to-export-l7-data" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:47Z published: 2026-10-05T15:39:47Z canonical: "docs.trellix.com/configure-the-monitoring-ports-to-export-l7-data" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the monitoring ports to export L7 data If you have at least one NTBA appliance added to the Manager, you can configure the required Sensor monitoring ports to export Layer 7 data to NTBA appliances. ## Task 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **NTBA Integration** → **Exporting.** Refer to McAfee Network Threat Behavior Analysis Product Guide for information on the **Exporting** page. In addition to enabling monitoring ports to export Layer 7 data, you must enable Layer 7 data collection on at least one interface or subinterface that corresponds to the monitoring ports configured to export that data.