--- title: "Configure the SNMPv3 user details on the MIB browser" slug: "configure-the-snmpv3-user-details-on-the-mib-browser-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/configure-the-snmpv3-user-details-on-the-mib-browser-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the SNMPv3 user details on the MIB browser For your MIB browser to be able to query the Sensor successfully, it should use the SNMPv3 account details that you have configured on the Sensor. So, you must configure the corresponding SNMPv3 details in your MIB browser. The details that you would generally need while configuring the SNMPv3 details in your MIB browser are as follows: - The Management port IP address of the Sensor. - Communication port for SNMPv3. You can specify only the standard port, which is 161. Make sure port 161 is open in the relevant firewalls of your network. - The user name that you configured in the SNMPv3 Users page of the Manager. - The security level, which is authPriv. - The authentication algorithm, which is MD5. - The authentication password. This is the **Authentication Password** that you configured in the SNMPv3 Users page of the Manager. - The privacy algorithm, which is DES. - The privacy password. This is the **Private Password** that you configured in the SNMPv3 Users page of the Manager.