--- title: "Configure Virtual Intelligent Sandbox network information" slug: "configure-virtual-intelligent-sandbox-network-information" updated: 2026-09-08T19:56:44Z published: 2026-09-08T19:56:44Z canonical: "docs.trellix.com/configure-virtual-intelligent-sandbox-network-information" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Virtual Intelligent Sandbox network information Manage the Virtual Intelligent Sandbox from virtual machine manager. 1. From your client virtual machine, access the virtual machine console with these credentials. - User name — **`cliadmin`** - Password — **`atdadmin`** 2. Change your password: Provide the old password as **`atdadmin`**, followed by the new password, then re-enter the new password to confirm. 3. In the command prompt, configure the Virtual Intelligent Sandbox: 1. Set a name for Virtual Intelligent Sandbox. For example, **`set appliance name matd_appliance_1`**. The password must be an alphanumeric character string up to 25 characters. The string must begin with a letter, and can include hyphens, underscores, and periods, but not spaces. 2. Set the Virtual Intelligent Sandbox management port IP address and subnet mask. For example, **`set appliance IP xx.xx.x.x 255.255.255.0`**. Do not assign this class C network IP addresses: 192.168.55.0/24 3. Set the default gateway IP address. For example, **`set appliance gateway xx.xx.x.x`**. 4. Set the management port speed and duplex settings using one of the following commands: - **` set mgmtport auto`** — Sets the management port in auto mode for speed and duplex. - **`set mgmtport speed (10|100) duplex (full|half)`** — Sets the speed to 10 Mbps or 100 Mbps in full or half-duplex mode. 5. Verify the configuration. - To view the configuration details, run the **`show`** command. - To check the network connectivity, run the **`ping <IP address>`** command. One of these messages appears: - **host is alive** — When the server is reachable. - **failed to talk to ** — When the host server is not reachable. 4. Restart the Virtual Intelligent Sandbox. :