--- title: "Configuring a HelixConnect HTTP proxy" slug: "configuring-a-helixconnect-http-proxy" tags: ["Integration", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:11Z published: 2026-09-02T19:14:11Z canonical: "docs.trellix.com/configuring-a-helixconnect-http-proxy" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a HelixConnect HTTP proxy Use the commands in this section to configure an HTTP proxy through which the HelixConnect tunnel to the Trellix Helix cloud is established. **To configure the HelixConnect HTTP proxy:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Configure the HTTP proxy: ``` hostname (config) # helixconnect http-proxy host port auth-type username password ``` where `type` can be `none`, `basic`, or `ntlm`. 3. Verify your changes: ``` hostname (config) # show helixconnect ``` ### Example The following example configures an HTTP proxy that uses basic authentication. ``` hostname (config) # helixconnect http-proxy host 192.168.32.21 port 3128 auth-type basic username jdoe password ABCD1234 hostname (config) # show helixconnect ``` > [!NOTE] > Note > > For an example of the `show helixconnect` command output, see Checking HelixConnect status.