--- title: "Configuring a secure syslog server and client" slug: "configuring-a-secure-syslog-server-and-client" updated: 2026-08-25T13:50:04Z published: 2026-08-25T13:50:04Z canonical: "docs.trellix.com/configuring-a-secure-syslog-server-and-client" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a secure syslog server and client Use the following procedures to configure a secure syslog server and client. ### Note If the connection is broken, the client side will keep trying to re-establish the connection. For best security, administrators must use SSH/HTTPS for remote administration sessions. ### Prerequisites - Administrator access To configure a secure syslog server: 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Set the receiving protocol of the rsyslog server: ``` hostname (config) # logging receive protocol tls port ``` 3. Configure the receive syslog cipher list for SSL/TLS: ``` hostname (config) # logging receive ssl cipher-list ``` where *<*cipher-list-name*>* can be `fips` (compliant with FIPS 140-3), `fips-high-security` (high security compliant with FIPS 140-3), `cc-ndpp` (compliant with CC-NDPP), `cc-ndpp-high-security` (high security compliant with CC-NDPP), `fips-and-cc-ndpp` (compliant with both FIPS 140-3 and CC-NDPP), or `fips-and-cc-ndpp-high-security` (high security compliant with both FIPS 140-3 and CC-NDPP). 4. Require TLSv1 or higher for remote syslog: ``` hostname (config) # logging receive ssl min-version tls1 ``` 5. Save your changes: ``` hostname (config) # write memory ``` To configure a secure syslog client: 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the port and the protocol to log on to the remote host: ``` hostname (config) # logging protocol tls port ``` where is the hostname or IP address of a syslog server where you want to send log messages. 3. Enable the remote syslog SSL/TLS certificate verification: ``` hostname (config) # logging remote ssl cert-verify ``` 4. Configure the remote syslog cipher list for SSL/TLS: ``` hostname (config) # logging remote ssl cipher-list ``` where *<*cipher-list-name*>* can be `fips` (compliant with FIPS 140-3), `fips-high-security` (high security compliant with FIPS 140-3), `cc-ndpp` (compliant with CC-NDPP), `cc-ndpp-high-security` (high security compliant with CC-NDPP), `fips-and-cc-ndpp` (compliant with both FIPS 140-3 and CC-NDPP), or `fips-and-cc-ndpp-high-security` (high security compliant with both FIPS 140-3 and CC-NDPP). 5. Save your changes: ``` hostname (config) # write memory ``` :