--- title: "Configuring a virtual File Protect Network using Microsoft Hyper-V Manager" slug: "configuring-a-virtual-file-protect-network-using-microsoft-hyper-v-manager" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/configuring-a-virtual-file-protect-network-using-microsoft-hyper-v-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a virtual File Protect Network using Microsoft Hyper-V Manager A virtual File Protect appliance requires no additional virtual network configuration. However, if you are using the ether2 interface to access storage, the ether1 and ether2 interfaces must be on different networks. You can use the following CLI command to configure a non-default gateway to reach the storage server from the ether2 interface: ``` hostname (config) # ip route {} | } { | } ``` :