--- title: "Configuring a virtual network" slug: "configuring-a-virtual-network" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-01T10:11:56Z published: 2026-10-01T10:11:56Z canonical: "docs.trellix.com/configuring-a-virtual-network" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a virtual network Your virtual Network Security appliance on KVM may require additional virtual network configuration. ### Important For information about enabling Port Mirroring and SSL Decryption Mirroring, see [Defining multiple queues for data ports](/network-and-platform/docs/defining-multiple-queues-for-data-ports). ### Enabling IPv6 communication for data traffic If you deployed using the Virtual Machine Manager UI and are using IPv6 traffic within the network, you must add parameters to the XML file associated with the installed virtual Network Security appliance. The parameters must be added in the NIC section for each data port. To enable IPv6 communication: 1. Shut down the virtual Network Security appliance. 2. Edit its XML file using the `virsh edit` command, such as `virsh edit TrellixFireeye-NX-4500V`. ### Note Trellix-NX-4500V is the domain name given during the installation. See Installing a Network Security virtual appliance using the KVM UI. 3. Add the attribute `trustGuestRxFilters='yes'` under the NIC sections for each of the data ports: `<interface type='direct' trustGuestRxFilters='yes'>` ###### Example ```plaintext                
       
``` :