--- title: "Configuring an IPS policy using a CMC profile (CLI)" slug: "configuring-an-ips-policy-using-a-cmc-profile-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/configuring-an-ips-policy-using-a-cmc-profile-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring an IPS policy using a CMC profile (CLI) From the Central Management System appliance CLI, you can use a central management console (CMC) profile to configure a custom IPS policy on managed IPS-enabled platforms in the centralized management domain. You can configure the custom IPS policy on a single managed IPS-enabled platform, or you can configure the policy on a group of managed platforms. ##### Prerequisites - Log in to the CLI of the Central Management System appliance as Operator or Admin. ##### Procedure To configure a custom IPS policy on a managed IPS-enabled platform: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Configure the first command of the CMC profile to create a custom IPS policy. The following example configures profile `c1` to create a custom IPS policy named **p1**. ``` hostname (config) # cmc profile c1 comment "IPS policy for IPS-ena NX platforms" hostname (config) # cmc profile c1 command 1 "ips policy p1" ``` 3. Configure the profile to specify required match attributes for the custom IPS policy. The following example configures the attributeds `attack‑target`, `min‑severity`, and `max‑severity`. ``` hostname (config) # cmc profile c1 command 2 "ips policy p1 match attack-target client" hostname (config) # cmc profile c1 command 3 "ips policy p1 match min-severity 8" hostname (config) # cmc profile c1 command 4 "ips policy p1 match max-severity 10" ``` 4. (Optional) Configure the profile to specify optional match attributes for the custom IPS policy. The following example configures an optional `protocol` attribute. ``` hostname (config) # cmc profile c1 command 5 "ips policy p1 match protocol SNMP" ``` 5. (Optional) Configure the profile to specify optional rule exclusion or inclusion attributes for the custom IPS policy. The following example configures the optional attributes `rules exclude` and `rules include`. ``` hostname (config) # cmc profile c1 command 6 "ips policy p1 rules exclude 85300001" ``` ``` hostname (config) # cmc profile c1 command 7 "ips policy p1 rules include 85300002" ``` ``` hostname (config) # cmc profile c1 command 8 "ips policy p1 rules include 85300003" ``` 6. Before you save the CMC profile to managed IPS-enabled platforms, list the CLI commands and comments in the profile. The following example step lists the CLI commands in the profile `c1`. ``` hostname (config) # show cmc profile c1 Profile c1   Comment:             IPS policy for IPS-ena NX platforms   Commands:      1. ips policy p1      2. ips policy p1 match attack-target client      3. ips policy p1 match min-severity 8      4. ips policy p1 match max-severity 10      5. ips policy p1 match protocol SNMP      6. ips policy p1 rules exclude 85300001      7. ips policy p1 rules include 85300002      8. ips policy p1 rules include 85300003 ``` ### Note To delete a command from the profile, use the **no cmc profile** *name* command and specify the **command** *sequence_number* option. The following example deletes the eighth command from the profile: ``` hostname (config) # no cmc profile c1 command 8 ``` 7. Apply the profile to a single managed IPS-enabled platform or to a group of appliances. - To apply the profile to a single managed appliance, use the **cmc profile** name command and specify the **apply appliance** name option. The following example step applies the profile to the appliance **NX_4400_IPS**. ``` hostname (config) # cmc profile c1 apply appliance NX_4400_IPS ============ Appliance NX_4400_IPS ============ Execution was successful. Execution output: Saving configuration file ... Done! ``` The configuration for the managed appliance **NX_4400_IPS** includes the definition of the custom IPS profile **p1**. - To apply the profile to a group of managed appliances, use the **cmc profile** name command and specify the **apply group** name option. The following example step applies the profile to the appliances in the group **NXips**, which is composed of IPS-enabled appliances named **NX_900_IPS** and **NX_10000_IPS**. ``` hostname (config) # cmc profile c1 apply group NXips ============ Appliance NX_900_IPS ============ Execution was successful. Execution output: Saving configuration file ... Done! ============ Appliance NX_10000_IPS ============ Execution was successful. Execution output: Saving configuration file ... Done! ``` The configurations for the managed appliances in group **NXips** include the definition of the custom IPS profile **p1**. 8. Save your changes. ``` hostname (config) # write memory ``` :