--- title: "Configuring auto-mounting on a USB device" slug: "configuring-auto-mounting-on-a-usb-device-5" tags: ["Network Security (NX)"] updated: 2026-09-10T10:31:16Z published: 2026-09-10T10:31:16Z canonical: "docs.trellix.com/configuring-auto-mounting-on-a-usb-device-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring auto-mounting on a USB device You can configure auto-mounting on a USB device attached to the Network Security appliance. Only one USB device can be mounted at a time. You can configure HTTP access to install system images, guest images, or security content from the USB device onto the appliance. > [!NOTE] > Note > > You can configure auto-mounting on a USB device only using the CLI. Prerequisites - Admin access #### Enabling or disabling auto-mounting on a USB device using the CLI Use the commands in this topic to enable or disable auto-mounting on a USB device attached to the Network Security appliance. You must enable auto-mounting when the USB device is attached. By default, auto-mounting is disabled. Auto-mounting will not mount the USB device when it is already attached to the appliance. Prerequisites - Admin access To enable auto-mounting on a USB device: 1. Go to CLI configuration mode: ```plaintext hostname > enable ``` ```plaintext hostname # configure terminal ``` 2. Enable auto-mounting on a USB device attached to the appliance: ```plaintext hostname (config) # media usb auto-mount enable ``` 3. Plug the USB device in to the appliance immediately. 4. Verify the USB device auto-mount configuration. ```plaintext hostname (config) # show media usb USB auto-mount configuration: Enabled:             yes Local web access:    yes Top-level directory: fireeye ``` To disable auto-mounting on the USB device: 1. Go to CLI configuration mode: ```plaintext hostname > enable ``` ```plaintext hostname # configure terminal ``` 2. Disable auto-mounting on the USB device: ```plaintext hostname (config) # no media usb auto-mount enable ``` 3. Verify the USB device auto-mount configuration. ```plaintext hostname (config) # show media usb USB auto-mount configuration: Enabled:             no Local web access:    yes Top-level directory: fireeye ``` #### Configuring HTTP access to install software updates using the CLI Use the commands in this topic to configure HTTP access to install software updates from a USB device onto the appliance. By default, you can access only the contents locally in the `fireeye` directory for the first partition from a specified URL. Prerequisites - Admin access - Enable auto-mounting on the USB device to the attached appliance. For details about how to enable auto-mounting, see [Enabling or disabling auto-mounting on a USB device using the CLI](/network-and-platform/docs/configuring-auto-mounting-on-a-usb-device-5#enabling-or-disabling-automounting-on-a-usb-device-using-the-cli) . To configure HTTP access to install software updates from a USB device: 1. Go to CLI configuration mode: ```plaintext hostname > enable ``` ```plaintext hostname # configure terminal ``` 2. Enable HTTP access on the loopback interface on the appliance: ```plaintext hostname (config) # media usb web-access enable local ``` Local web access is enabled by default. 3. Specify the top-level directory as the location to extract software updates on a USB device: ```plaintext hostname (config) # media usb web-access top-dir fireeye ``` This directory will be used as the URL to extract the software on the USB device. For example, if you specified the install directory as `fireeye/gi-13.0701`, the URL for the installation is `http://localhost/media/usb1/fireeye/gi-13.0701`. 4. Verify that the USB device is mounted: ```plaintext hostname (config) # show media usb USB auto-mount configuration:  Enabled:             yes  Local web access:    yes  Top-level directory: fireeye USB auto-mount status:  Device mounted:      yes  Access URL:          N/A ``` 5. Download software updates using the specified URL as the location to install the updates. See [Installing guest images from a USB device using the CLI](/network-and-platform/docs/configuring-auto-mounting-on-a-usb-device-5#installing-guest-images-from-a-usb-device-using-the-cli) for a representative procedure. #### Installing guest images from a USB device using the CLI Use the commands in this topic to install guest images from a USB device onto the appliance. By default, you can access only the contents locally in the `fireeye` directory for the first partition from a specified URL. > [!NOTE] > Note > > The Central Management System appliance does not host guest images when it is operating in "inline" mode. Prerequisites - Admin access - Enable auto-mounting on the USB device to the attached appliance. For details about how to enable auto-mounting, see [Enabling or disabling auto-mounting on a USB device using the CLI](/network-and-platform/docs/configuring-auto-mounting-on-a-usb-device-5#enabling-or-disabling-automounting-on-a-usb-device-using-the-cli) . - Configure HTTP access. For details, see [Configuring HTTP access to install software updates using the CLI](/network-and-platform/docs/configuring-auto-mounting-on-a-usb-device-5#configuring-http-access-to-install-software-updates-using-the-cli). - Complete the steps in the following order to set up the files correctly to install guest images from a USB device: 1. Download the guest images tar file from the Trellix network. 2. Extract the contents on the USB device. 3. Remove the version numbers. Copy the following file names: - `server-manifest.VERSION` to `server-manifest` - `server-manifest.VERSION.md5` to `server-manifest.md5` - `server-manifest.VERSION.v2` to `server-manifest.v2` - `server-manifest.VERSION.v2.md5` to `server-manifest.v2.md5` To download guest images from a USB device: 1. Download guest images using the specified URL as the location to install the guest images: ```plaintext hostname (config) # guest-images download url ``` where `URL` is the location that you specified as the top-level directory for the installation. Wait for the appliance to fully download the guest images before beginning any installations. 2. Verify the download progress: ```plaintext hostname (config) # show guest-images download ``` 3. After the download is complete, install the guest images: ```plaintext hostname (config) # guest-images install ``` 4. Verify that guest images are properly installed: ```plaintext hostname (config) # show guest-images ``` #### Mounting or unmounting a USB device using the CLI Use the commands in this topic to manually mount or unmount a USB device to the attached appliance. Trellix recommends that you physically remove the USB device from the port. Use the `media usb mount` command before you attach the drive, and use the `media usb eject` command after you unplug it. > [!NOTE] > Note > > The `media usb eject` command will have no effect if the USB device is not mounted. Prerequisites - Admin access To mount a USB device: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Mount the USB device to the attached appliance: ```plaintext hostname (config) # media usb mount ``` To unmount a USB device: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Unmount the USB device from the attached appliance: ```plaintext hostname (config) # media usb eject ```