--- title: "Configuring automatic security content updates using the CLI" slug: "configuring-automatic-security-content-updates-using-the-cli-2" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:26Z published: 2026-08-24T20:40:26Z canonical: "docs.trellix.com/configuring-automatic-security-content-updates-using-the-cli-2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring automatic security content updates using the CLI Use the CLI commands in this topic to configure automatic security content updates. **To configure automatic security content updates:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable automatic updates of security content: ``` hostname (config) # fenet security-content autoupdate action update ``` 3. Specify the automatic update time interval: - To update daily, enter the following command, where `<hh:mm>` specifies the time to start the update based on a 24-hour clock.: ``` fenet security-content autoupdate schedule daily at ``` - To update hourly, enter the following command, where `<mm>` is the number of minutes after the hour when the update starts.: ``` fenet security-content autoupdate schedule hourly at ``` - To update after a set number of minutes, enter the following command, where `<mm>` is the number of minutes between updates.: ``` fenet security-content autoupdate schedule every ``` - To use the default interval, enter the following command: ``` fenet security-content autoupdate schedule default ``` 4. (Optional) To receive email notification of each security content update, enter the `fenet security-content autoupdate notification enable` command. Notifications are disabled by default. After enabling automatic update notifications, you can specify which kind of notifications to receive: - To receive an email notification if the automatic update of security content fails, enter the following command. This option is the default. ``` fenet security-content autoupdate notification class fail ``` - To receive an email notification when the automatic update of security succeeds or fails, enter the following command: ``` fenet security-content autoupdate notification class info ``` 5. Validate the update configuration. ``` hostname (config) # show fenet security-content status ``` 6. Save your changes. ``` hostname (config) # write memory ```