--- title: "Configuring autosupport for system event notifications using the CLI" slug: "configuring-autosupport-for-system-event-notifications-using-the-cli-6" tags: ["Malware Analysis (AX)", "AX 10.x", "Product Usage"] updated: 2026-10-01T10:07:09Z published: 2026-10-01T10:07:09Z canonical: "docs.trellix.com/configuring-autosupport-for-system-event-notifications-using-the-cli-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring autosupport for system event notifications using the CLI Use the commands in this section to configure autosupport for system event notifications. (See [Viewing system events](/network-and-platform/docs/configuring-system-event-notifications-using-the-cli-6) for information about viewing a full list of events.) To configure autosupport: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Enable autosupport email notifications (disabled by default): ```plaintext hostname (config) # email autosupport enable ``` 3. Display the current configuration for generating autosupport emails for system events: ```plaintext hostname (config) # show email ``` 4. Specify each event for which autosupport email notifications should be sent: ```plaintext hostname (config) # email autosupport event ``` 5. Configure the supplemental Certificate Authority (CA) certificates that are used to verify the server certificates. - To use only the built-in list: ```plaintext hostname (config) # email autosupport ssl ca-list none ``` - To use the default supplemental CA certificate list: ```plaintext hostname (config) # email autosupport ssl ca-list default-ca-list ``` 6. Configure a security type to use for autosupport email. - No TLS: ```plaintext hostname (config) # email autosupport ssl mode none ``` - TLS: ```plaintext hostname (config) # email autosupport ssl mode TLS ``` - TLS none: ```plaintext hostname (config) # email autosupport ssl mode tls-none ``` 7. Verify the server certificates: ```plaintext hostname (config) # email autosupport cert-verify ``` 8. Save your changes: ```plaintext hostname (config) # write memory ``` :