--- title: "Configuring AV-Suite to store the objects using the CLI" slug: "configuring-av-suite-to-store-the-objects-using-the-cli-3" tags: ["Product Usage", "FX 10.x", "AX 10.x", "NX 10.x", "Network Security"] updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/configuring-av-suite-to-store-the-objects-using-the-cli-3" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring AV-Suite to store the objects using the CLI Follow these steps to configure how long you want to store information (filename, file type, engine type, MD5 checksum, and SHA-256 hash file) in AV-Suite for malicious and non-malicious objects using the CLI. To view the signature , source and other details of an SHA-256 hash file, use the `show analysis intel sha256 <sha256>` command. To view the signature , source and other details of an MD5 checksum, use the `show analysis intel MD5 <MD5>` command. **To configure the length of time to store the objects:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify how long you want to store the objects. ``` hostname (config) # analysis retro-hunt time ``` The range is from 1 to 720 hours. The default value is 0 hours, which means an unlimited time period. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the setting for how long the objects are stored in AV-Suite. ``` hostname (config) # show analysis config  .....    Analysis reset duplicate since           : 2018/04/19 10:41:23    Retroactive hunting                      : Enabled    Retroactive hunting time                : 0 hours    Retroactive update interval              : 300 seconds    VM throttling                            : AUTO    Riskware detection                       : Disabled    Block Riskware                           : No    ..... ```