--- title: "Configuring Azure Blob" slug: "configuring-azure-blob" updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/configuring-azure-blob" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Azure Blob To add your Azure account details to your File Protect appliance: 1. Note the following details from your Azure Blob account: - Account Name - Shared Access Key - Subscription ID 2. To add the details via the File Protect Web UI, go to **Settings>Storage** and enter the details under the **Azure Configuration** section. ![AzureConfigFX.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-21b58a20-8679-3fc3-1e73-3f2a68774d87(2).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A59%3A19Z&se=2026-11-20T05%3A59%3A19Z&sr=c&sp=r&sig=EWqXQ%2B%2FQB4PswJiHXoA%2BZ19w6ug%2BZR2jYPpgUN4M1JU%3D) 3. To add the details via the File Protect CLI, use the following commands: - `fmps azure config account-name <name>` - `fmps azure config sas-key <sharedAccessKey>` - `fmps azure config subscription-id <subscriptionID>` 4. You can verify the added details using the following command: - `show fmps azure config` After you configure Azure Blob storage on the File Protect appliance, you can create a new event subscription on your Azure Blob account and assign them to the queue. :