--- title: "Configuring basic network settings using the Web UI" slug: "configuring-basic-network-settings-using-the-web-ui-5" tags: ["Malware Analysis (AX)", "AX 10.x", "Product Usage"] updated: 2026-10-01T21:03:45Z published: 2026-10-01T21:03:45Z canonical: "docs.trellix.com/configuring-basic-network-settings-using-the-web-ui-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring basic network settings using the Web UI Use the **Network Settings** page to configure basic network settings for the Malware Analysis appliance. ### Viewing management interface detail settings Use the **Interface Details** section to view the configuration of the management interface. This is a read-only section. The management interface is configured during the initial configuration, and can be modified later using the CLI. ![All_NtwkSettingsIface_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ded45bd9-4c71-d471-7590-d103ddfd3b13(10).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A04%3A06Z&se=2026-11-20T10%3A04%3A06Z&sr=c&sp=r&sig=dUTevpfZ9gbllJJ%2FAnAy1OSAm%2B2HaQ7FMDQ%2FE%2Bu%2BALQ%3D) To view the management interface configuration: 1. Click the **Settings** tab. 2. Select **Network** on the sidebar. 3. Locate the **Interface Details** section at the top of the page. ### Configuring DNS servers Use the **Configure DNS Server Addresses** section to configure DNS server addresses. ![All_NtwkSettingsDNS_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-897b2e2a-f57e-5176-6024-a9eaf0048fb4(10).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A04%3A06Z&se=2026-11-20T10%3A04%3A06Z&sr=c&sp=r&sig=dUTevpfZ9gbllJJ%2FAnAy1OSAm%2B2HaQ7FMDQ%2FE%2Bu%2BALQ%3D) To configure DNS servers: 1. Click the **Settings** tab. 2. Click the **Appliance Settings** subtab. 3. Select **Network** on the sidebar. 4. In the **Configure DNS Server Addresses** section, enter the IP address of the primary DNS server. 5. (Optional) Enter the IP address of a secondary DNS server. 6. Click **Apply**. The order in which the DNS servers are traversed is displayed in the **DNS Resolution order** list. An error message is displayed if no server is active. ### Configuring domain names Use the **Configure Domain Names** section to add or remove domain names. ![All_NtwkSettingsDomainNames_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f5ee4394-b80b-1526-dc5a-6e2e874b9e8f(10).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A04%3A06Z&se=2026-11-20T10%3A04%3A06Z&sr=c&sp=r&sig=dUTevpfZ9gbllJJ%2FAnAy1OSAm%2B2HaQ7FMDQ%2FE%2Bu%2BALQ%3D) To add domain names: 1. Click the **Settings** tab. 2. Click the **Appliance Settings** subtab. 3. Select **Network** on the sidebar. 4. In the **Configure Domain Names** section, click **Add Domain Name**. 5. Enter a domain name, click **Add**. ![All_NtwkSettingsDomainNamesAdd_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-046f9729-1b0f-9b62-8cbb-61438715b440(10).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A04%3A06Z&se=2026-11-20T10%3A04%3A06Z&sr=c&sp=r&sig=dUTevpfZ9gbllJJ%2FAnAy1OSAm%2B2HaQ7FMDQ%2FE%2Bu%2BALQ%3D) 6. Repeat the previous steps to configure additional domain names. The order in which the domain names are traversed is displayed in the **Domain Names Resolution order** list. To remove domain names: 1. Locate the domain name you want to delete. 2. Click the Delete (trash can) icon in the **Delete** column for each domain name you want to remove. 3. Click **YES**. The domain name is deleted from the configuration. 4. Close the message. ### Enabling IPv6 Use the **Configure IPv6** section to enable or disable IPv6 routing. You can also use this section to enable or disable IPv6 on the SMTP interface. To enable IPv6 routing: 1. Click the **Settings** tab. 2. Click the **Appliance Settings** subtab. 3. Select **Network** on the sidebar. 4. Enable IPv6: - To enable IPv6 routing on the system, select the **Global IPv6** checkbox, and then click **Apply**. - To enable IPv6 on the management interface, select the **Management Interface IPv6** checkbox, and then click **Apply**. To disable IPv6 routing: 1. Click the **Settings** tab. 2. Select **Network** on the sidebar. 3. Disable IPv6: - To disable IPv6 routing on the system, clear the **Global IPv6** checkbox, and then click **Apply**. - To disable IPv6 on the management interface, clear the **Management Interface IPv6** checkbox, and then click **Apply**. ### Enabling VPN The **VPN Settings** section appears at the bottom of the page if a valid MD_ACCESS license is installed. You can enable VPN only when IPv6 is enabled on the system. For details, see the *Managed Defense Quick Start Guide*. ### Note VPN support for HX Series appliances should not be enabled except by Managed Defense. :