--- title: "Configuring CDN as the DTI source" slug: "configuring-cdn-as-the-dti-source-1" tags: ["Helix Enterprise", "Integration", "Sec Ops and Analytics"] updated: 2026-09-14T13:34:39Z published: 2026-09-14T13:34:39Z canonical: "docs.trellix.com/configuring-cdn-as-the-dti-source-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring CDN as the DTI source Use the commands in this topic to configure dual-port communication and change the default DTI download source to "CDN." This is required for appliances that are *not* Helix Enterprise-enabled but that are connected to a Helix Enterprise-enabled cloud Central Management System appliance, as described in [Appliance management](/network-and-platform/docs/appliance-management). To configure dual-port communication: 1. Log into the non-Helix Enterprise appliance CLI. 2. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal               ``` 3. Enable dual-port communication: ```plaintext hostname (config) # fenet dti source type CMS address-type cms-auto               ``` 4. Verify the change: ```plaintext hostname (config) # show fenet dti configuration ``` 5. Save the change: ```plaintext hostname (config) # write memory               ``` To configure CDN as the DTI source: 1. Prevent the Central Management System appliance from changing this appliance's DTI source address, port, username, and password: ```plaintext hostname (config) # no fenet dti source override enable ``` 2. Specify "CDN" as the DTI download server for this appliance: ```plaintext hostname (config) # fenet dti source default CDN ``` 3. Validate your changes: ```plaintext hostname (config) # show fenet dti configuration ``` 4. Save your changes: ```plaintext hostname (config) # write memory               ``` **Example** The following example changes the address type on the ex-08 appliance to "dual-port" and then changes the DTI source to "CDN." ```plaintext ex-08 (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:    Mode               : online    Download source    : CMS (DTIUser@10.11.10.11 : singleport) - Managed by CMS    Upload destination : CMS (DTIUser@10.11.10.11 : singleport) - Managed by CMS    ... ex-08 (config) # fenet dti source type CMS address-type cms-auto ex-08 (config) # no fenet dti source override enable ex-08 (config) # fenet dti source default CDN ex-08 (config) # show fenet dti configuration DTI  CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:    Mode               : online    Download source    : CDN (DTIUser@cloud.fireeye.com) - Managed by CMS    Upload destination : CMS (DTIUser@10.11.10.11 : singleport) - Managed by CMS    ... ```