--- title: "Configuring default syslog settings using the CLI" slug: "configuring-default-syslog-settings-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/configuring-default-syslog-settings-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring default syslog settings using the CLI Follow these steps to set the default settings for all syslog servers. These settings override any global settings on the appliance. - Alert Level - Delivery Frequency - Notification Format - Syslog Facility For more detailed information on configuring default remote system logs, see the *CLI Command Reference* . ### Prerequisites - You must have Admin or Operator access to the Malware Analysis appliance CLI. ### Default alert level Set the alert severity for all notifications: `fenotify rsyslog default send-as <severity>` command. For example, to set all notifications at the alert severity (recommended): ``` hostname (config) # fenotify syslog default send-as alert ``` ### Delivery frequency Set the delivery frequency for all notifications: `fenotify rsyslog default delivery <frequency>` command. For example, to send a notification after each alert (recommended): ``` hostname (config) # fenotify syslog default delivery per-event ``` ### Notification format Set the format for all notifications using the `fenotify rsyslog default format <format>` command. For example, to use the CEF format: ``` hostname (config) # fenotify syslog default format cef ``` ### Syslog facility Set the syslog facility value for all notifications using the `fenotify rsyslog default faclity <value>` command. For example, to set the syslog facility to local 4 (recommended): ``` hostname (config) # fenotify syslog default facility local4 ```