--- title: "Configuring dual-port communication using the CLI" slug: "configuring-dual-port-communication-using-the-cli-2" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/configuring-dual-port-communication-using-the-cli-2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring dual-port communication using the CLI Single-port communication is the default behavior, and requires no configuration. Use the commands in this topic to enable dual-port communication instead. **To enable dual-port communication:** 1. Log in to the appliance CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. If your appliance has already been added to the Central Management System appliance, type `yes` to confirm that you want to enter configuration mode: ``` ****************** *** CMS notice *** ******************    This system is under management of a CMS. Please note that    the CMS may update this system's configuration, which could    overwrite changes that you have made locally.    Enter 'YES' to enter configuration mode anyway: yes ``` 4. Enable dual-port communication: ``` hostname (config) # fenet dti source type CMS address-type cms-auto ``` > [!NOTE] > Note > > You can also use the `no fenet dti source type CMS address-type` command to restore dual-port communication. 5. Verify the configuration: ``` hostname (config) # show fenet dti configuration ``` The word "singleport" should not appear in the entries in the Active Settings list. 6. Save your changes. ``` hostname (config) # write memory ``` ### Example The following example enables dual-port communication. ``` hostname (config) # fenet dti source type CMS address-type cms-auto hostname (config) # show fenet dti configuration CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:   Mode               : online   Download source    : CMS (DTIUser@10.2.0.0) - Managed by CMS   Upload destination : CMS (DTIUser@10.2.0.0) - Managed by CMS   Mil service        : CMS (DTIUser@10.2.0.0) - Managed by CMS   AVSuite service    : CMS (DTIUser@10.2.0.0) - Managed by CMS    AVAILABLE OPTIONS:  ----------------------------------------------------  Download   User                  Address  ----------------------------------------------------  CDN        DTIUser               cloud.fireeye.com  CMS        DTIUser               10.2.0.0  DTI        DTIUser               staticcloud.fireeye.com  ... ```