--- title: "Configuring EML parsing settings" slug: "configuring-eml-parsing-settings-1" updated: 2026-09-08T23:22:51Z published: 2026-09-08T23:22:51Z canonical: "docs.trellix.com/configuring-eml-parsing-settings-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring EML parsing settings By default, the File Protect appliance analyzes saved email (`.eml`) files for malware issues. Use the commands in this section to configure the maximum number of attachments that can be analyzed for each `.eml` file and the maximum recursive depth of the `.eml` file to be analyzed. ### Note EML parsing is configured using the CLI only. To configure EML parsing settings: 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Set the number of attachments: ``` hostname (config) # eml attachment limit count ``` where *count* is the number of attachments to analyze for each `.eml` file. The default value is 5; the range of values is 0-20. 3. Set the maximum recursive depth of the `.eml` file: ``` hostname (config) # eml recursive limit count ``` where *count* is the maximum recursive depth of the `.eml` file to be analyzed. The default value is 3. The range of values is 0-3. 4. Verify the configuration: ``` hostname (config) # show eml EML attachments limit: 5 EML extraction recursive limit: 3 ``` :