--- title: "Configuring event notifications using the CLI" slug: "configuring-event-notifications-using-the-cli" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-08-25T10:59:54Z published: 2026-09-08T23:23:29Z canonical: "docs.trellix.com/configuring-event-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring event notifications using the CLI ### Prerequisites - TheFile Protect File Protect appliance must have an established connection to the Internet. - You must have Admin or Operator access to the File Protect appliance. ### Configuring Event Notifications Use the CLI commands in this topic to configure event notifications. To configure event notifications using the CLI: 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Check which protocols are already enabled: `hostname (config) # show fenotify email hostname (config) # show fenotify http hostname (config) # show fenotify rsyslog hostname (config) # show fenotify snmp` 3. Configure the protocols that you want to use: - [Email](/docs/configuring-email-notifications-using-the-cli-1) - [HTTP](/network-and-platform/docs/filepaligotmpfireeye64521cc8c26d1fx100ugcontenttopicsnotifyallhttpnotificationclihtm) - [Rsyslog](/docs/configuring-rsyslog-notifications-using-the-cli-1) - [SNMP](/docs/configuring-snmp-notifications-using-the-cli-1) 4. Confirm that the protocols are configured correctly: `hostname (config) # show fenotify email` `hostname (config) # show fenotify http` `hostname (config) # show fenotify rsyslog` `hostname (config) # show fenotify snmp` 5. Enable the notifications. By default, notifications are enabled. This command only affects notifications for enabled protocols. If a protocol has been disabled, you must enable the protocol before enabling notifications. `hostname (config) # fenotify enable` 6. Send a test email message to all enabled recipients: `hostname (config) # fenotify email send-test` 7. Save the configuration: `hostname (config) # write memory` :