--- title: "Configuring forensic analysis integration on managed Network Security Network Security appliances using the Web UI" slug: "configuring-forensic-analysis-integration-on-managed-network-security-3" updated: 2026-08-25T21:17:39Z published: 2026-08-25T21:17:39Z canonical: "docs.trellix.com/configuring-forensic-analysis-integration-on-managed-network-security-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring forensic analysis integration on managed Network Security Network Security appliances using the Web UI Use the **Appliance Settings: Forensics** page to integrate with packet analyzer applications that perform full packet capture and analysis for specific target and source IP addresses. Integrations with Solera Networks, RSA NetWitness, and PX Technology are supported. This page is displayed only when the integrations are enabled using CLI commands from both the Network Security CLI and theCentral Management System CLI. - **Solera Networks**—Use the` forensic analysis enable `command. - **RSA NetWitness**—Use the` netwitness analysis enable `command. - **PX Technology**—Use the` npulse analysis enable `command. To configure forensic analysis integration: 1. Click **Settings** and then select **Appliance Settings**. 2. Click **Forensics** in the sidebar. 3. (Optional) Use the controls at the top of the page to define the scope of the changes. :