--- title: "Configuring forensic analysis integration using the Web UI" slug: "configuring-forensic-analysis-integration-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-10-01T10:40:35Z published: 2026-10-01T10:40:35Z canonical: "docs.trellix.com/configuring-forensic-analysis-integration-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring forensic analysis integration using the Web UI After you enable forensic analysis integration using the CLI, the **Forensics** tab is displayed on the **Settings** tab of the Web UI with a section on the **Settings: Forensics** page for each enabled integration. ![NX_Forensics_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6e8747a9-8387-ba64-7149-cf5725ef562f.png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A17%3A11Z&se=2026-11-20T05%3A17%3A11Z&sr=c&sp=r&sig=PSJdpNpNHzb1bAweRmlS72s20J4Mx5nk%2Fpofwv2X3ng%3D) After the integration is configured, links to packet data are available in all alerts on the **Alerts** tab. ![NX_ForensicsAlerts.scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5f2f8f9b-88a2-e5f3-b5d7-900936d9d9b0.png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A17%3A11Z&se=2026-11-20T05%3A17%3A11Z&sr=c&sp=r&sig=PSJdpNpNHzb1bAweRmlS72s20J4Mx5nk%2Fpofwv2X3ng%3D) ### Prerequisites - Administrator or Operator access to the Network Security appliance - Enable integrations with one or more partners. For details about how to enable integration with Solera Networks, see [Enabling or disabling forensic analysis integration with Solera Networks using the CLI](/network-and-platform/docs/enabling-or-disabling-forensic-analysis-integration-solera-networks-cli) . For details about how to enable an integration with a Packet Capture platform, see [Enabling or disabling forensic analysis integration with a PX Series platform using the CLI](/network-and-platform/docs/enabling-or-disabling-forensic-analysis-integration-packet-capture-cli) . For details about how to enable integration with RSA NetWitness, see [Enabling or disabling forensic analysis integration with RSA NetWitness using the CLI](/network-and-platform/docs/enabling-or-disabling-forensic-analysis-integration-rsa-netwitness-cli). **To configure the integration with Solera Networks:** 1. In the Web UI, choose **Settings** > **Forensics**. 2. In the **Forensic Analysis Settings** section: 1. Enter the IP address of the Solera appliance in the Host box. 2. Enter the port that listens for traffic from the Network Security appliance in the Port box. 3. Click **Update**. 4. To view packet capture (pcap) data: 1. Click the **Alerts** tab and then click the **Alerts** sub-tab. 2. Click the pcap link associated with the integration. **To configure the integration with RSA NetWitness:** 1. In the Web UI, choose **Settings** > **Forensics**. 2. In the **Netwitness Analysis Settings** section, enter the NetWitness appliance base URL in the following format: *https:///investigation//navigate/query* or *http:///investigation//navigate/query* > [!NOTE] > Note > > The URL depends on your specific NetWitness settings. 3. Click **Update**. 4. To view packet capture (pcap) data: 1. Click the **Alerts** tab and then click the **Alerts** sub-tab. 2. Click the pcap link associated with the integration. To disable the integration, clear the **Enable Netwitness Analysis** checkbox in the **Netwitness Analysis Settings** section. **To configure the integration with a** **Packet Capture** **platform:** 1. In the Web UI, choose **Settings** > **Forensics**. 2. In the **Npulse Analysis Settings** section, enter the PX Series appliance base URL in the following format: *https:///i/searches.html* or *http:///i/searches.html* 3. Click **Update**. 4. To view packet capture (pcap) data: 1. Click the **Alerts** tab and then click the **Alerts** sub-tab. 2. Click the pcap link associated with the integration. To disable the integration, clear the **Enable Npulse Analysis** checkbox in the **Npulse Analysis Settings** section.