--- title: "Configuring global host-key authentication in a NAT deployment" slug: "configuring-global-host-key-authentication-in-a-nat-deployment-2" updated: 2026-09-08T22:57:27Z published: 2026-09-08T22:57:27Z canonical: "docs.trellix.com/configuring-global-host-key-authentication-in-a-nat-deployment-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring global host-key authentication in a NAT deployment When global host-key authentication is enforced on a managed File Protect appliance, you must obtain the public host-key from the Central Management System appliance and import it into the File Protect appliance global host-keys database. This is described in [Host-key authentication](/docs/configuring-secure-shell-ssh-authentication-5) . The Central Management System host-key string includes its IP address. If the Central Management System appliance is in an internal network behind a NAT gateway, the IP address in the key string you obtain from the Central Management System Web UI or CLI must be replaced with the virtual IP address that is mapped to the Central Management System on the NAT gateway. ### Example In this example, the Central Management System platform is behind the NAT gateway. Its IP address is 1.1.1.5, and its virtual IP address is 3.3.3.5. ### Note This example is from an Email Security — Server appliance, but it is representative of File Protect appliances as well. ![CM_Int_EX_Initiates_sp_v2.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c55b9a1e-85ee-6cb7-43f4-73332edf9fbd(8).jpg?sv=2026-02-06&spr=https&st=2026-11-20T06%3A10%3A20Z&se=2026-11-20T07%3A10%3A20Z&sr=c&sp=r&sig=naRU%2FW0wVIhmr2FesREMZq1glrTVnen6IFD%2FxT2hrCw%3D) The host-key string you obtain from the Central Management System Web UI or CLI starts with "1.1.1.5". For example: ``` 1.1.1.5 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCzd5JwKBjHLe/jxkF0JzWcXOTw9l0 bz2SctkQrihkqg/zXqrmxAfgbzYulDSIxOKZTh2VBnKsy0qRWrCps64Itlh6iRlr7Jxa+jAtTAGsy ... ``` Before you import the host-key into the Email Security — Server global host-keys database, you must replace "1.1.1.5" with "3.3.3.5." For example: ``` 3.3.3.5 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCzd5JwKBjHLe/jxkF0JzWcXOTw9l0 bz2SctkQrihkqg/zXqrmxAfgbzYulDSIxOKZTh2VBnKsy0qRWrCps64Itlh6iRlr7Jxa+jAtTAGsy ... ``` :