--- title: "Configuring global host-key authentication" slug: "configuring-global-host-key-authentication" updated: 2026-08-25T13:50:04Z published: 2026-08-25T13:50:04Z canonical: "docs.trellix.com/configuring-global-host-key-authentication" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring global host-key authentication Global host-key authentication is enabled for communication between the Central Management System and managed appliances when compliance mode is entered. For more information about server-initiated connections, see the “Configuring Secure Shell (SSH) Authentication” section of the *CMS Administration Guide*. This section contains instructions on how to obtain a host key and how to import a global host key. For more information about client-initiated connections, see the “Configuring Secure Shell (SSH) Authentication” section of the *System Administration Guide* for your appliance. This section contains instructions on how to obtain a host key and how to import a global host key. If you are importing global host keys in compliance mode for a Central Management System High Availability (HA) installation, perform the following steps: 1. Stop the Central Management System HA engine on both the primary and secondary nodes (using the `ha engine stop` command). 2. Enable compliance on both nodes (using the `compliance apply standard all` command). 3. Import keys as described in the *CMS High Availability Deployment Guide*. 4. Restart both nodes (using the `reload` command). :