--- title: "Configuring health monitoring parameters for the health services" slug: "configuring-health-monitoring-parameters-for-the-health-services" updated: 2026-08-25T21:17:42Z published: 2026-08-25T21:17:42Z canonical: "docs.trellix.com/configuring-health-monitoring-parameters-for-the-health-services" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring health monitoring parameters for the health services The **Health Services** tab allows you to configure health monitoring parameters for all the available health services on the appliance. This tab offers functionalities for enabling or disabling health services, as well as updating or adjusting their configurable properties. Using the **Heath Services** page, you can: ### Important All the services listed in the **About > Services Health** table are available for configuration in **Settings > Health Services**. - View the status of all the available health services on the appliance. - Enable or disable a health service on the appliance. - Enable or disable notifications of any health service on the appliance. - Configure and update the daily digest or time schedule for all health services available on the appliance. - Use Search to filter the health service by name and category. - Adjust or update the current threshold values dynamically based on the specific needs. To configure health monitoring parameters for health services: 1. To set or update daily digest for all health services 1. Click the Settings tab. 2. Click Health Services on the sidebar. 3. From the **Daily Digest** drop down list, select a time and date to send a notification about the health of the services connected to the appliance. 4. Click Update Daily Digest. 2. To configure other parameters: 1. Click the **Enable** checkbox for the service if you want to enable the service to function on the appliance. 2. Click the **Notification** checkbox to allow the appliance to send notification about the service health. 3. To add/update configurable properties to health services: 1. Click the **Enable** checkbox for the service if you want the configure its threshold values, click **Update**. A success message indicating **Operation successful** is displayed. 2. Click the **Settings** icon to update the current values, click **View/Update values**. 3. In the **Update Current Values** dialog box, enter a new threshold value and then click **Update**. :