--- title: "Configuring HTTP proxy server settings using the CLI" slug: "configuring-http-proxy-server-settings-using-the-cli-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:26Z published: 2026-08-24T20:40:26Z canonical: "docs.trellix.com/configuring-http-proxy-server-settings-using-the-cli-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring HTTP proxy server settings using the CLI Use the commands in this section to configure and enable an HTTP proxy server on an appliance. **To configure and enable an HTTP proxy server:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Configure the proxy server hostname or IP address, and the port (if you do not want to use the default, port 8080): ``` hostname (config) # fenet proxy host [:] ``` 3. *Optional*: Specify the credentials for basic authentication: - Specify the user: ``` hostname (config) # fenet proxy auth basic user ``` - Specify the password: ``` hostname (config) # fenet proxy auth basic password ``` 4. *Optional*: Specify a user-agent string: ``` hostname (config) # fenet proxy user-agent ``` 5. Enable the proxy server: ``` hostname (config) # fenet proxy enable ``` 6. Verify your changes: ``` hostname (config) # show fenet ``` 7. Save your changes: ``` hostname (config) # write memory ``` > [!NOTE] > Note > > The `show fenet status` command also displays HTTP proxy settings, but does not show whether the proxy server is enabled or disabled. The `show fenet` command output includes or excludes "`disabled`" to indicate the status. ### Example The following example configures an HTTP proxy server with basic authentication credentials. ``` hostname (config) # fenet proxy host 192.168.2.3 hostname (config) # fenet proxy auth basic user bsmith hostname (config) # fenet proxy auth basic password abcd6789 hostname (config) # fenet proxy enable hostname (config) # show fenet DTI CLIENT CONFIGURATION:  ...  Http proxy       : bsmith@192.168.2.3:8080 (user agent:)  ... ``` ``` hostname (config) # show fenet status ... HTTP Proxy:    Address       : 192.168.2.3:8080    Username      : bsmith    User-agent    :    ... ```