--- title: "Configuring initial settings using a keyboard and monitor" slug: "configuring-initial-settings-using-a-keyboard-and-monitor-6" tags: ["Network Security", "Customer", "IVX 11.x", "NX 11.x", "AX 11.x", "FX 11.x", "EX 11.x", "CMS 11.x", "Product Usage"] updated: 2026-11-19T20:07:56Z published: 2026-11-19T20:07:56Z canonical: "docs.trellix.com/configuring-initial-settings-using-a-keyboard-and-monitor-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring initial settings using a keyboard and monitor You can connect keyboard and video cables to the appliance and then log in to the Malware Analysis CLI to perform the initial configuration. See your *Hardware Administration Guide* to view the port locations. **To configure initial settings using a keyboard and monitor:** 1. Plug in a keyboard and a VGA monitor. 2. When prompted, enter the default username (`admin`) and password (`admin`) for the permanent "admin" user. 3. You are asked to accept the End User License Agreement (EULA). Enter **y** to accept the terms of the agreement. 4. Enter **y** when you are prompted to use the Configuration Wizard for initial configuration. Then respond to the prompts as described in [Configuration wizard steps](/network-and-platform/docs/configuration-wizard-steps-6) . 5. After you answer the questions, the wizard summarizes your answers. To change an answer, enter the step number. Press **Enter** to save changes.