--- title: "Configuring Initial Settings Using a Keyboard and Monitor" slug: "configuring-initial-settings-using-a-keyboard-and-monitor-8" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:42Z published: 2026-09-09T22:45:42Z canonical: "docs.trellix.com/configuring-initial-settings-using-a-keyboard-and-monitor-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Initial Settings Using a Keyboard and Monitor You can connect keyboard and video cables to the appliance and then log in to the appliance CLI to perform the initial configuration. See your *Hardware Administration Guide* to view the port locations. To configure initial settings using a keyboard and monitor: 1. Plug in a keyboard and a VGA monitor. 2. When prompted, enter the default username (`admin`) and password (`admin`) for the permanent "admin" user. 3. When prompted to change the password, configure a new password using the` username admin password <new password> `command. You will be logged out. Log in again with the new password. 1. You are asked to accept the End User License Agreement ([EULA](https://www.fireeye.com/company/legal.html)). Enter **y** to accept the terms of the agreement. 2. Enter **y** when you are prompted to use the Configuration Wizard for initial configuration. Then respond to the prompts as described in [Configuration Wizard Steps](/docs/configuration-wizard-steps). - After you answer the questions, the wizard summarizes your answers. To change an answer, enter the step number. Press **Enter** to save changes. :