--- title: "Configuring inline mode using the Web UI" slug: "configuring-inline-mode-using-the-web-ui" tags: ["Network Security (NX)"] updated: 2026-08-24T22:01:11Z published: 2026-08-24T22:01:11Z canonical: "docs.trellix.com/configuring-inline-mode-using-the-web-ui" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring inline mode using the Web UI Use the **Settings** page to configure inline mode. In inline mode, you can configure the appliance with one or two network port pairs. The following example shows one network port pair. ![NX_InlineWebUI_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f92bbc24-f069-55a9-4e3b-9995a0aa6d7a.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A51Z&se=2026-11-20T07%3A53%3A51Z&sr=c&sp=r&sig=mrN067bi8iP1yCkftcc7cDlhiP7F6mq%2BaHJ%2Bg8Wqwm0%3D) The following example shows two network port pairs. ![NX_Inline_WebUI_2pp_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-21f6705c-91df-4e6d-669c-3c633b070f7c.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A51Z&se=2026-11-20T07%3A53%3A51Z&sr=c&sp=r&sig=mrN067bi8iP1yCkftcc7cDlhiP7F6mq%2BaHJ%2Bg8Wqwm0%3D) Operational modes for inline deployment are described in the following table. | Mode | Description | | --- | --- | | Block | Blocks malicious traffic (recommended). - FS Open—In case of failure, all traffic passes through (recommended). - FS Close—In case of failure, all traffic is blocked. (Use this setting only if the device is actively monitored). | | Monitor | Monitors the traffic and generates alerts on malicious events. | | Bypass | Forced bypass wherein the Network Security appliance neither blocks nor analyzes traffic. > [!NOTE] > Note > > Starting with version 7.1.0, Network Security appliances bypass packets larger than 1650 bytes rather than dropping them. | For details about inline deployment, refer to the *Hardware Administration Guide* for your appliance model. Prerequisites - Operator or Admin access To configure inline mode: 1. Click the **Settings** tab. 2. Click **Inline Operational Modes** on the sidebar. 3. Select a blocking option for each available port pair. (Inline Block FS Open is recommended). 4. Click **Update: Operational Modes**.