--- title: "Configuring Inline operational modes using the Web UI" slug: "configuring-inline-operational-modes-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/configuring-inline-operational-modes-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Inline operational modes using the Web UI Use the **Operational Modes** area in the **Policy Settings** page to configure operational modes for an inline policy on an interface using the Web UI. ![NX_InterfacesOperateModes_Scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2bd51114-006d-087f-2836-610c158d3a68.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A56%3A53Z&se=2026-11-20T03%3A56%3A53Z&sr=c&sp=r&sig=2NManiswhlBRh5KbXEtumErr%2BzwDuICrY%2BJZWzqlaoc%3D) | Mode | Description | | --- | --- | | Tap | Operate without inline functionality. This mode is the default for out-of-band monitoring. | | Bypass | Starting with version 7.1.0, Network Security appliances have the ability to bypass packets larger than 1650 bytes rather than dropping them. | | Block | Types of inline blocking attacks: - FS Open (fail-safe open)—In case of a failure of software, hardware, or power, all packets are allowed to pass through the appliance or sensor (recommended). - FS Close (fail-safe close)—In case of a failure of hardware or power, all traffic is blocked. > [!WARNING] > Caution > > If you select the FS Close (fail-safe close) inline blocking type, you must use active end-to-end monitoring of the device to enable the re-routing of traffic around the device in the event of a hardware or power failure. | | Monitor | Monitor all packets without any blocking and generate alerts about potential infections. | **To configure operational modes for an inline policy on the Network Security appliance:** 1. In the Web UI, choose **Settings** > **Inline Operational Modes**. 2. Select the relevant operational mode for each port pair in the **Operational Modes** area: - **Tap** - **Bypass** - **Block**—Select one of the following types of block attacks: - **FS Open (fail-safe open)** - **FS Close (fail-safe close)** - **Monitor** 3. To configure the appliance with the selected operational modes, click **Update: Operational Modes**. The following message appears: ![NX_InterfacesOperateModesConfirm_Scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c118f5b3-92b1-cdf6-03fb-cf9990cbe51f.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A56%3A53Z&se=2026-11-20T03%3A56%3A53Z&sr=c&sp=r&sig=2NManiswhlBRh5KbXEtumErr%2BzwDuICrY%2BJZWzqlaoc%3D)