--- title: "Configuring inline operational modes" slug: "configuring-inline-operational-modes" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-21T18:19:28Z published: 2026-09-12T20:42:46Z canonical: "docs.trellix.com/configuring-inline-operational-modes" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring inline operational modes You can configure operational modes for an inline policy on an interface to support detection mode and blocking mode by using the Network Security appliance Web UI or CLI: - [Configuring inline operational modes using the Web UI](/network-and-platform/docs/configuring-inline-operational-modes-using-the-web-ui) - [Configuring inline operational modes using the CLI](/network-and-platform/docs/configuring-inline-operational-modes-using-the-cli) Detection mode monitors all packets and does not block any traffic. Blocking mode blocks infectious attacks, while allowing all benign packets to pass through the interface. ### Prerequisites - Administrator or Operator access to the Network Security appliance