--- title: "Configuring IVX Cloud settings from the Central Management System appliance" slug: "configuring-ivx-cloud-settings-from-the-central-management-system-appliance" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T21:25:27Z published: 2026-09-08T21:25:27Z canonical: "docs.trellix.com/configuring-ivx-cloud-settings-from-the-central-management-system-appliance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring IVX Cloud settings from the Central Management System appliance For virtual File Protect appliances that are integrated with IVX Cloud and managed through a Central Management System appliance, you can configure the DOD settings through the Central Management System Web UI. 1. Log in to the Central Management System Web UI. 2. Navigate to **Appliances** > **Sensors**. 3. Select **File Protect** in the **Sensor Group** drop-down menu. 4. Click **Detection on Demand/ Configure** under **Cluster Deployment**. 5. In the **Submission Engine** page of the File Protect Web UI, you can perform the required configuration. 6. (Optional) To switch the detection mode to MVX, select the required mode in the **Action** column. If you switch the mode to MVX, you can skip the next steps. For information on configuring settings, see [Integrating DaaS with virtual File Protect appliance using Web UI](/docs/adding-the-api-key-to-the-virtual-file-protect-appliance-using-the-web-ui-1) and [API authentication key management](/docs/api-authentication-key-management-2). :