--- title: "Configuring Live mode for malware analysis" slug: "configuring-live-mode-for-malware-analysis" updated: 2026-09-08T22:57:27Z published: 2026-09-08T22:57:27Z canonical: "docs.trellix.com/configuring-live-mode-for-malware-analysis" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Live mode for malware analysis You can configure live mode for malware analysis through CLI. 1. Specify the network interface (Ethernet 1 or Ethernet 2) to be used for live analysis. ``` analysis live live-interface ``` 2. Set the external IP address and subnet mask for the Ethernet 2 port. ``` analysis live external ip ``` 3. Configure the default gateway IP address for the Ethernet 2 interface. ``` analysis live default-gateway ip ``` 4. Set the name server IP used for MVX guest images. ``` analysis live nameserver ip ``` 5. Configure the HTTP proxy IP address and port in the FDQN/IP and Port. ``` analysis live http-proxy ``` 6. (Optional) If proxy authentication is required, configure the credentials. ``` analysis live proxy-authentication ``` 7. Enable live URL dynamic analysis. ``` analysis live url-dynamic-analysis enable ``` 8. Enable controlled Live mode. ``` analysis live controlled-live-mode enable ``` :