--- title: "Configuring monitoring ports on the Network Security appliance" slug: "configuring-monitoring-ports-on-the-network-security-appliance" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/configuring-monitoring-ports-on-the-network-security-appliance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring monitoring ports on the Network Security appliance After you create and attach the network interfaces on Azure, you must configure the same IP addressing for the corresponding monitoring ports on the Network Security appliance. For example, you must configure the IP address and subnet mask configured on the pether3 interface in Azure on the Network Security pether3 port, and configure the IP address and subnet mask configured on the pether4 interface in Azure on the Network Security pether4 port. To configure monitoring port addressing: 1. Log in to the Network Security Web UI. 2. Select **Settings** > **Network**. 3. Locate the **Monitor Port IP Configurations** section. 4. In the **Monitor Port** drop-down list, select the first monitoring interface you created in Azure. 5. In the **IPv4** address and **Subnet Mask** fields, enter the exact values that you configured for the interface in Azure (see Creating Network Security network interfaces). 6. Click **Save**. 7. Repeat these steps for each additional monitoring port you created in Azure. :