--- title: "Configuring monitoring ports on the Network Security instance" slug: "configuring-monitoring-ports-on-the-network-security-instance" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-02T13:45:29Z published: 2026-10-02T13:45:29Z canonical: "docs.trellix.com/configuring-monitoring-ports-on-the-network-security-instance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring monitoring ports on the Network Security instance After you create and attach the network interfaces on AWS, you must configure the same IP addressing for the corresponding monitoring ports on the Network Security instance. For example, you must configure the IP address and subnet mask configured on the AWS eth2 device on the Network Security pether3 port, and configure the IP address and subnet mask configured on the AWS eth3 device on the Network Security pether4 port. ### Note For the mappings of AWS devices to Network Security monitoring ports, see [Configuring Network Security network interfaces on AWS](/network-and-platform/docs/configuring-network-security-network-interfaces-on-aws-manual-method-only). To configure monitoring port addressing: 1. Log in to the Network Security Web UI. 2. Select **Settings** > **Network**. 3. Locate the **Monitor Port IP Configurations** section. 4. In the **Monitor Port** drop-down list, select the first monitoring interface you created on AWS. 5. In the **IPv4** address and **Subnet Mask** fields, enter the exact values that you configured for the interface in AWS (see [Creating network interfaces](/network-and-platform/docs/creating-network-interfaces)). 6. Click **Save**. 7. Repeat these steps for each additional monitoring port you created on AWS. 8. Continue to one of the following: - [Deploying Network Security instances in AWS in inline mode](/network-and-platform/docs/deploying-network-security-instances-in-aws-in-inline-mode) - [Configuring traffic mirroring on AWS for TAP or SPAN mode](/network-and-platform/docs/configuring-traffic-mirroring-on-aws-for-tap-or-span-mode) :