--- title: "Configuring network address translation (NAT)" slug: "configuring-network-address-translation-nat-2" updated: 2026-08-25T21:11:49Z published: 2026-08-25T21:18:40Z canonical: "docs.trellix.com/configuring-network-address-translation-nat-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring network address translation (NAT) The following sections describe how to add an appliance to the Central Management System platform for management in a deployment in which the Central Management System platform, the appliance, or both are behind a NAT gateway. - [About NAT address mapping](/docs/about-nat-address-mapping-4) - [Mappings used when the Central Management System appliance initiates the connection](/docs/mappings-used-when-the-central-management-system-appliance-initiates-connection-1) - [Mappings used when the Central Management System managed appliance initiates the connection](/docs/mappings-used-when-central-management-system-managed-appliance-initiates-connect) - [Configuring global host-key authentication in a NAT deployment](/docs/configuring-global-host-key-authentication-in-a-nat-deployment-4) - [Adding an appliance in a NAT deployment (using the platform)](/docs/adding-an-appliance-in-a-nat-deployment-using-the-central-management-system-1) - [Accepting a management request in a NAT deployment](/docs/accepting-a-management-request-in-a-nat-deployment-1) ### Important Network Address Translation (NAT) is not supported in Central Management System High Availability (HA) deployments. :