--- title: "Configuring network address translation (NAT)" slug: "configuring-network-address-translation-nat-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-09-29T19:18:10Z published: 2026-09-29T19:18:14Z canonical: "docs.trellix.com/configuring-network-address-translation-nat-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring network address translation (NAT) The following sections describe how to add an appliance to the Central Management System platform for management in a deployment in which the Central Management System platform, the appliance, or both are behind a NAT gateway. - [About NAT address mapping](/network-and-platform/docs/about-nat-address-mapping) - [Mappings used when the Central Management System appliance initiates the connection](/network-and-platform/docs/mappings-used-when-the-central-management-system-appliance-initiates-connection) - [Mappings used when the Intelligent Virtual Execution - Server managed appliance initiates the connection](/network-and-platform/docs/mappings-used-when-the-intelligent-virtual-execution-server-appliance-initiates) - [Configuring and activating an accessible DTI server address](/network-and-platform/docs/configuring-and-activating-an-accessible-dti-server-address-1) - [Sending a management request in a NAT deployment](/network-and-platform/docs/sending-a-management-request-in-a-nat-deployment) - [Configuring global host-key authentication in a NAT deployment](/network-and-platform/docs/configuring-global-host-key-authentication-in-a-nat-deployment) > [!WARNING] > Important > > Network Address Translation (NAT) is not supported in Central Management System High Availability (HA) deployments.