--- title: "Configuring network address translation (NAT)" slug: "configuring-network-address-translation-nat" updated: 2026-08-27T07:56:43Z published: 2026-09-08T22:58:11Z canonical: "docs.trellix.com/configuring-network-address-translation-nat" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring network address translation (NAT) The following sections describe how to add an appliance to the Central Management System platform for management in a deployment in which the Central Management System platform, the appliance, or both are behind a NAT gateway. - [About NAT address mapping](/docs/about-nat-address-mapping-5) - [Mappings used when the Central Management System appliance initiates the connection](/docs/mappings-used-when-the-central-management-system-appliance-initiates-connection-2) - [Mappings used when the File Protect managed appliance initiates the connection](/docs/mappings-used-when-the-file-protect-appliance-initiates-the-connection) - [Configuring and activating an accessible DTI server address](/docs/configuring-and-activating-an-accessible-dti-server-address-3) - [Sending a management request in a NAT deployment](/docs/sending-a-management-request-in-a-nat-deployment-3) - [Configuring global host-key authentication in a NAT deployment](/docs/configuring-global-host-key-authentication-in-a-nat-deployment-5) :